10" Carbon Inline water filter with 1/4" (6mm) tubing connector

Filtration

Filtering chlorine, VOCs (Volatile organic compounds), pesticide, chemicals, bad taste and bad odour.

Features

• Material safety approved by NSF.
• Coconut activated carbon for nicer filtered water.
  
• Food grade plastic housing material.
• BPA free.

Specification

• Dimension: 56 mm x 250mm   (without connectors).
• Maximum working pressure 100 PSI.
• Maximum temperature 100 F.
• Flow: Factory stated 1.6 litres per minute (0.5 Gallon per minute).
• Flow: Our test results is 4.1 litres per minute with 50 PSI PLV installed.
• Service life 1500 Gal (under 2 ppm Chlorine) vary depending on water quality.
• 1/4" (6mm) tubing connectors comes with rubber O'ring
• Cold water only.

IMPORTANT: if installed under static pressure (with 6 mm tubing) a 50 PSI Pressure Limiting Valve is mandatory.

Replace cartridge on time, blocked cartridge might cause leak.

Please make sure you are using Watermark (Australian standard) approved Pressure Limiting Valve, we sell them separately.