12" Sediment (Polypropylene) Inline water filter with Inbuilt quick connect for 1/4" (6mm) tubing NSF approved

Filtration

For sand, rust, mud, particles, algae, filterable cyst, rust particles, animal parts and any other sediments.

Specification

• Dimension: 67 mm x 285 mm.
• Maximum working pressure 100 PSI.
• Maximum temperature 100 F.
• Flow: Factory stated 3 litres per minute (0.8 Gallon per minute).
• Flow: Our test results is 4.1 litres per minute with 50 PSI PLV installed.
• Service life 4000 Gal (at 2 NTU turbidity) vary depending on your water quality and quantity.
• Food grade plastic housing.
• BPA free.
• Built in 1/4" (6 mm tube) quick connect fitting. 
• Filtration media:   Polypropylene.
• Recommended life: maximum 12 months (vary depending on your water quality and quantity)
• Cold water only.

IMPORTANT: if installed under static pressure a 50 PSI Pressure Limiting Valve is mandatory

Replace cartridge on time, blocked cartridge might cause leak.

Please make sure you are using Watermark (Australian standard) approved Pressure Limiting Valve, we sell them separately.