12" Carbon + Sediment Inline water filter with 1/2" garden hose quick connector

Filtration

Carbon filtering chlorine, VOCs (Volatile organic compounds), pesticide, chemicals, bad taste and bad odour

Sediment (Polypropylene) filtering sand, rust, mud, particles, algae, filterable cyst, rust particle from old piping, animal parts and any other sediments

IMPORTANT if installed under static pressure (eg under sink) 50 PSI Pressure Limiting Valve is mandatory

Please make sure you are using Watermark approved PLV, we sell them separately

Please replace your cartridge on time, blocked cartridge might cause leaking and burst on the connection caused by pressure building up in the cartridge

 Features

• NSF approved by www.NSF.org for material safety for the carbon only
• The NSF mark is your assurance that the product has been tested by one of the most respected independent certification organisations in existence today
• Special ordered using coconut carbon for nicer filtered water
  
• Food grade plastic housing material

Specification

• If installed under static pressure Pressure Limiting Valve is mandatory
• Max Diameter 140 mm Max Length (without connectors) 300 mm
• Maximum working pressure 100 PSI
• Maximum temperature 100 F
• Service life 4000 Gal (at 2 NTU turbidity for sediment and at under 2 ppm Chlorine for the carbon) vary depending on water quality and quantity
• Cold water only