10" Carbon + Sediment Inline water filter with 1/4" (6mm) tubing connector

Filtration

Carbon filtering chlorine, VOCs (Volatile organic compounds), pesticide, chemicals, bad taste and bad odour

Sediment (Polypropylene) filtering sand, rust, mud, particles, algae, filterable cyst, rust particle from old piping, animal parts and any other sediments 

Features

• Material safety approved by NSF.
• Coconut activated carbon for nicer filtered water.
  
• NSF approved Polypropylene.
• Food grade plastic housing material.
• BPA free.

Specification (for both)

• Dimension: 56 mm x 250mm   (without connectors).
• Maximum working pressure 100 PSI.
• Maximum temperature 100 F.
• Service life 1500 Gal (under 2 ppm Chlorine) vary depending on water quality.
• Flow: Factory stated 1.6 litres per minute (0.5 Gallon per minute).
• Flow: Our test results is 4.1 litres per minute with 50 PSI PLV installed.
• Cold water only.
• 1/4" (6mm) tubing connectors comes with rubber O'rings.
  
• Media: Coconut activated carbon and Polypropylene for sediment filter.

IMPORTANT: if installed under static pressure a 50 PSI Pressure Limiting Valve is mandatory

Replace cartridge on time, blocked cartridge might cause leak.

Please make sure you are using Watermark (Australian standard) approved Pressure Limiting Valve, we sell them separately.